Here is video about how to install for starters https://www.youtube.com/watch?v=9GiqM9fpLKA&t=267s https://www.youtube.com/watch?v=mkaH6zxiA8I&t=306s
Video Demo :https://www.youtube.com/watch?v=6mXM-oGggrM
About This Instructable:http://www.instructables.com/id/Led-Cube-8x8x8/
If you need the Schematic and the Steps of soldering please email us by ask question,we will send doc of instruction into your box ASAP.
You can use it to achieve the Dynamic 3D effect:
2. Rain graphic effect
3. Leaping graphics effect
4. Rotating graphic effect
5. Square move effect
6. Square light move effect
7. Lamp standard rollover effect
8. Square magnify and shrink effect
9. Reverse lamp
10. Triangle three-dimensional graphics rotation effect
11. Article lamp running effect
12. Pull screen graphics effect
13. Fast and slow display
Product Dimensions 9.1 x 2.4 x 6.4 inches
Item Weight 12 ounces
PCB Ciruit Board x1
3mm blue LED x512
20P IC socket x9
74HC573 DIP x9
470ohm resistor x8
XH2.54-40P round female pin x2
10uf 25V electrolytic capacitor x2
22pf ceramics capacitor x2
4.7K ohm resistor x2
USB to DC005 cable x1
DC005 power socket x1
18P IC socket x1
ULN2803 DIP x1
40P IC socket 1
STC12C5A60S2 (with code) 1
A09-103 Resisters x1
8*8 Self-locking switch x1
12MHz crystals x1
LED 3mm x1
0.8mm cable x1
This is a DIY kit, you need to have some knowledge of electronics and ability.
Needs a lot of soldering, you should have enough patience.
S2, S3 is the reserved position, there is no actual use, the package is not included.
Make a great and challenge lightshow
Good practice to starters and you need to have some knowledge of electronics and soldering ability.
512 Blue LEDs in a Arduino DIY 3D 8x8x8 cube
PCB Size: 11.1 x 12.7cm. Power Supply Voltage: 4.5~5.5V.